J/109 Specifications

Archived page · 2016

Archived page (captured 2016). Model details, prices and dates may be out of date; check the manufacturer for current information.


J-109



J/109 Specifications

July 18, 2006

•

Lloyd's approved, CK-57AL-600 Baltek Contourkore end

grained balsa composite construction using biaxial and

unidirectional glass fabrics with vinylester resin on outer

hull layer.

•

Patented SCRIMP resin infusion system molding process

for optimum laminate strength with 65-70% glass content

in structural skins.

•

Pearson Composites 10 year transferable warranty

against hull blistering.

•

3,900 lb. 7.0' draft, variable chord, high lift, lead keel

bolted and epoxy bonded to deep molded stub

w/sump. (4,260 lb. 5.75' shoal keel optional)

•

Off-white deck with a high traction molded non-skid.

•

Contrasting color double boot stripe on hull.

•

Low maintenance molded ORC size foredeck toe-rails.

•

Bow locker with deck hatch for anchoring gear.

•

Molded cockpit storage & LPG Gas lockers

•

Molded stern platform w/swim ladder mount.

•

Molded companionway instrument pod with spray shield

dodger storage.

•

GRP molded structural primary bulkhead.

•

SCRIMP molded structural grid.

•

SCRIMP molded heavy-duty ring frame accepting shroud

loads through stainless tie rods.

•

All intermediate bulkheads glassed to hull and deck for

additional stiffness.

•

Custom aluminum mast step included within grid.

Propulsion & Steering

•

Yanmar 3YM30C 29 hp. diesel engine with saildrive, hour

meter, 100 amp Balmar alternator, and fresh watercooling

with heat exchanger.

•

Yanmar lighted panel recessed in cockpit includes

electric stop, tachometer, alarms for oil, battery, and

temperature.

•

Fuel gauge in cockpit.

•

Engine throttle control.

•

1" Engine insulation with removable front and side engine

cover access hatches.

•

20-gallon fuel capacity with baffles and inspection/clean

out located under aft cabin berth.

•

2 bladed Flex-O-Fold geared folding propeller.

•

High aspect balanced rudder design w/large diameter

custom molded FRP shaft mounted in Edson rudder

bearings to exceed ABS specs.

•

Edson 54" Diamond Series aluminum wheel with natural

leather grip on custom molded pedestal with 5" Ritchie

compass, through shaft brake, and wheel height stainless

guard.

•

Custom designed aluminum emergency tiller.

Plumbing & Electrical

•

Manual bilge pump in cockpit.

•

Electric bilge pump w/switch & vented loop.

•

Manual fresh water foot pump in head and galley.

•

35-gallon water tank under port settee (additional water

optional).

•

Raritan Marine head with holding tank and "Y" valve and

overboard discharge pump.

•

Icebox drain with valve.

•

Direct overboard head/shower sump pump.

•

Cold pressure water system (Hot water option).

•

Marelon seacocks and double-clamped hoses below the

waterline.

•

DC Lighting package to include swiveling tulip & dome

lights with fluorescent light in head.

•

(2) 105amp deep cycle AGM glass-mat batteries.

•

12V Hella DC metered distribution panel with Hella DC

battery monitoring system.

•

Battery switch with DC main breaker.

•

DC outlet plug in nav station

•

UL approved stranded, tinned copper ABYC color-coded

wiring throughout.

•

Navigation lights and steaming light.

•

Seahood with 6 wire 22 gauge cable to nav station.

•

Bonding system to meet ABYC project E-1.

•

(2) Harken 46.2 AST (self-tailing) primary winches.

•

(2) Harken 40.2 AST secondary winches.

•

(2) 10" Harken Speed-Grip aluminum lock-in winch

handles w/(2) PVC handle holders.

•

6:1 Harken mainsheet system with integral 4:1 fine tune.

•

Harken 4:1 traveler system.

•

Harken Adjustable Jib/Genoa lead system with purchase.

•

Harken Black Magic 57mm 1967 foot blocks on cockpit

coaming side for genoa sheets.

•

(4) Folding Wichard pad eyes for outboard genoa & jib

leads mounted outboard of standard tracks. (2 ea side)

•

150 cams for lazy spin sheets when not in use.

•

(3) Harken 1958 for tack line on bowsprit and spinnaker

sheet blocks on U-bolts fwd of stern pulpit legs to P&S.

•

(8) Harken 6050 teardrop halyard/reef turning blocks

mounted to aluminum mast collar. Halyards lead aft

through (2) Harken quad 6066 organizers to Spinlock XTS

double stoppers.

•

Roller furling control line w/Harken 2636 foredeck block,

S.S. lined bulleye fairleads and Harken 150 cam cleat

w/425 cam fairlead.

•

2:1 J/Sprit control line leading to (2) Harken 0350 Sprit

blocks, 340 block on forward bulkhead, aft through

bulkheads and starboard handrail to cockpit 150 cam.

•

(2) Bow chocks, (2) 8" bow cleats, (2) 8" stern cleats.

•

Custom S.S. stemplate strap w/ U-Bolt tack fitting,

chainplates, & backstay tang. (optional anchor roller).

•

(2) Skylight Hatches of sizes 15" x 20" and 22" x 22".

•

Five aluminum framed cabin opening ports (two of 12" &

three of 24" lengths), one fixed 24" port above nav

station, on cabin sides. Three 12" cockpit opening ports.

•

Thurston cockpit dodger with side curtains mounted

against splash molding

(choice of standard Sunbrella

colors).

•

Acrylic companionway drop board with nylon storage

rails in cockpit locker.

J/109 Specifications Continued

July 18, 2006

•

ORC Size double 5/32" lifelines & tapered stainless

stanchions w/ bases, large gates to port and starboard,

custom bow & stern rails, and stern gate.

•

Telescoping stern swim/boarding ladder.

•

(4) 12" x 24" poly mesh line bags.

•

Flag staff and 3 x 5 American flag.

•

Two helmsman footrests in teak.

•

Gimbaled, 3 burner (including oven), Force 10 LPG

stove/oven w/S.S. safety bar.

•

Highly polished double stainless sink mounted to wheat

colored laminate counter top.

•

Molded icebox with foam insulation, single lid, and utility

storage shelves.

•

(2) Dry goods storage areas w/ shelf & acrylic slider

covers.

•

Two utensil drawers aft of stove.

•

Additional storage cabinet below drawers.

•

Laminated wood fiddle with integral handhold around

sink island.

•

Pot and pan storage in cabinet under stove/oven.

•

Trash storage under sink w/flip lid access.

•

Cabinet for cleaning supplies and to access trash under

sink.

•

Double spreader Sparcraft One-Design anodized

aluminum mast & boom package with white powder

coat finish.

•

Sparcraft Performance Vang with purchase system.

•

Retractable Carbon Fiber J/Sprit extendable to 5.5'

beyond bow w/integral end caps and adjuster system.

•

Continuous rod rigging package with Hall pre-assembled

headstay for standard Harken headsail furling.

•

Hall running rigging package including Technora main &

genoa halyards, Spectra spin halyard and sheets, XLS

polyester main & jib sheets, and control lines.

•

Harken split-drum Unit 1.0 standard headsail furling

system.

•

Sailtec -8 integral hydraulic backstay adjuster.

•

Varnished cherry wood interior.

•

Varnished cherry hull siding in main cabin. Vinyl lined hull

siding in cabins forward and aft (varnished wood hull

siding optional in these cabins).

•

Simulated ½" teak & holly cabin sole.

•

Forward cabin includes 2 hanging lockers with locker

doors and shelves above, hinged access to storage

below berth, and full-length shelf over V-berth to port.

•

Aft cabin to port with recessed door to main cabin,

hanging locker with door and shelf above and large

berth with full-length shelf on hull.

•

Settee berths in main cabin with shelves outboard, and

storage behind back rests (tanks and storage under).

•

Deluxe bolstered cushions w/choice of nylon fabric colors

in main salon, nav station and cabins.

•

Drop-leaf table with wood fiddles & bottle storage

compartment.

•

Chart table w/chart storage under table, shelf storage

outboard, hinged overhead electrical & instrumentation

panel. Tool storage below hinge-up seat, single drawer

with cabinet on inboard face below table, and open

compartment outboard under tabletop.

•

Head with recessed wood trimmed door from main cabin

and access door to starboard aft cockpit locker. Head

includes handheld shower, sink, vanity, mirror, handhold

and storage.

•

Angled teak companionway treads with non-skid strips.

•

Vinyl overhead in main, forward, aft cabins and head.

Package Options

Comfort Group

•

Includes three piece cockpit cushion set for helmsman

coordinated canvas work of lifeline pads and mainsail

cover

with J/109 emblem to match dodger.

Systems Group:

•

Includes: Hot water tank and plumbing, cockpit shower,

plus additional 35 gal water tank.

DC Refrigeration:

•

12V Seafrost DC Refrigeration System and Additional 3rd

105amp Deep Cycle glass mat battery.

Marina Group:

•

Includes 120VAC/30A shore power service with Pro

Mariner battery charger, 50ft cord, AC panel, and five

GFI protected outlets.

Deluxe Trim Group:

•

Includes varnished wood ceilings in the forward and aft

cabins.

Other Options

•

Two Tone Deck

•

Cove Stripe

•

5.75' 4,260 lb. Shoal Draft Keel.

•

Removable transom locker/dock box (Molded in same

color as deck).

•

Varnished Louvered Storage Cabinets in Main Cabin

(port and/or starboard).

•

Removable Bow Anchor Roller.

•

Removable varnished teak cockpit table w/storage bag

Notice

Specifications are effective as of hull #312 and subject to change without

prior notice or obligation. J/109s will be constructed with specifications in effect

at time of construction. J Boats reserves the right to periodically upgrade these

specifications through additions, deletions and substitutions.