J/133 Specifications
Archived page (captured 2016). Model details, prices and dates may be out of date; check the manufacturer for current information.
J-133
J/133 Specifications
September 1, 2006 Page 1
•
SCRIMP infusion molded sandwich construction using biaxial, triaxial and quadraxial E-glass with Baltek Super-Light 45end-grained balsa core in the Hull and Deck. Vinylester resin throughout all GRP components. (SCRIMP is the patented
resin infusion molding process of TPI Technologies, Inc.)
•
White Gel Coat hull with single bootstripe (choose from a selection of gelcoat colors).•
White gelcoat deck with choice of five non-skid colors in tones of white, gray and beige.•
Hull-to-deck joint bonded with aircraft-grade methacrylate adhesive.•
Lamination specifications to exceed ABS offshore yacht standards.•
TPI 5 year structural warranty with 10 year transferable warranty against hull blisters.•
Molded structural grid infused to hull for a primary bond to hull shell. Grid includes keel floors, mast step, engine bed andlongitudinal supports.
•
GRP molded main structural bulkhead, bonded with epoxy to the hull and deck with dual openings to forepeak & head.•
Molded companionway seahood with integral instrument pod, molded slider and acrylic drop board equipped withinside/outside stainless hasp and storage rack in cockpit locker.
•
Molded stern boarding/swim platform with boarding ladder.•
ORC height foredeck toe-rails integrally molded into deck forward of mast.•
Variable chord, high lift, low VCG keel with bulb and optional shoal keel.•
Stainless steel handrails on cabin trunk.•
Bow locker with deck hatch and overboard drainage for stowage of anchoring gear or spinnaker in snuffer.•
Cockpit seat locker to port capable of storing a 6-man life raft (full cut-out locker with aft head option).•
Two lazarette lockers on afterdeck.•
Molded propane locker to starboard, vented & drained overboard.Propulsion & Steering
•
Yanmar 54 hp 4JH4-E, fresh water cooled, 4 cylinder, naturally aspirated diesel engine with Saildrive SD-50, Racor fuelfilter & 125 amp Power Max alternator.
•
Yanmar recessed engine instrument panel in cockpit with Lexan cover.•
Flex-O-Fold two-blade, geared folding propeller.•
Sound insulation throughout engine box area.•
Shift/throttle control.•
50 gallon aluminum fuel tank with baffles & access port, vent and deck fill under port settee berth.•
Carbon fiber reinforced composite rudder blade & custom carbon rudder shaft mounted in high quality rudder bearings.•
Molded steering pedestal with Ritchie binnacle compass, SS Guard to accommodate radar/plotter pod, Edson steeringcomponents and 60" Diamond series wheel with elkhide comfort grip.
•
Teak helmsman foot braces.•
Aluminum emergency tiller with deck plate access.Plumbing
•
Hot & cold pressure water system with hot water tank and accumulator tank.•
Self-priming direct sump pump for shower draining directly overboard.•
Automatic bilge pump with float switch and dedicated panel in nav station wired direct to DC system.•
Manually operated bilge pump mounted in the cockpit. (second pump below included in Systems Group Package option).•
50 gallons of water standard in custom molded tank with baffles, inspection port, and secured in place below starboardmain cabin settee berth. Additional 40 gallon tank option of bladder-bag type mounted below starboard quarter berth.
•
Icebox drain with valve to bilge.•
Marelon seacocks below waterline including head intake, head discharge, head & galley sink drains.•
Through-hulls include bowsprit-housing drain, anchor locker drain, stainless engine exhaust on transom, bilge pumpdischarge on transom, wheel well drain, LPG locker drain.
…J/133 Specifications Continued
September 1, 2006 Page 2
Electrical
•
Standard system batteries include: (2) group 31 (105amp) deep cycle batteries to serve the house, and (1) Optima 1000(1,100 CCA) battery for dedicated service to the engine. Batteries are Lifeline AGM sealed, absorbed glass mat type
series.
•
Battery Isolator with parallel switch to allow engine start from house bank.•
Xantrex Link 20 Battery Monitor (Replaced by Link 2000 with Marina Group Option).•
Master battery switch at nav station with (1,2,Both,Off) for House batteries and single On/Off switch for engine startbattery.
•
DC Electrical distribution panel w/digital condition meters and circuit breakers.•
Navigation, steaming & compass lights.•
Bonding system to meet ABYC project E-4.5 and E-4.8 Lightning protection.•
DC (& optional AC) grounding systems to meet ABYC E-8 and E-9.•
Galvanic Isolation protection with Marina Group Option.•
Propane solenoid.•
Nine swiveling stainless halogen reading lamps, halogen overhead lights in main cabin, flexible armed lamp at navigationstation, and fluorescent light in the head.
•
Main cabin with varnished cherry veneered bulkheads and furniture units, with cold molded and solid varnished trim.•
Fore and aft cabins finished with off-white vinyl hull surfaces (varnished cherry hull siding option).•
6' 4" headroom in main cabin.•
Forward Cabin includes a hanging locker, vanity with cabinet and drawers and changing seat to port, a large V-berthplatform with hinged access to storage below, port side shelf on hull, a watertight bow sprit enclosure and small vanity to
starboard. Transducer access through small access area in teak and holly cabin floor.
•
Large head with molded sink, outboard storage locker, H&C shower with dedicated shower sump draining overboard.•
Main cabin settee berths with split and bolstered backrest cushions port and starboard.•
Choice of Nylon bolstered cushion fabrics.•
Cabinet storage outboard of port & starboard settees each with two doors and mid-height bookshelf between.•
Varnished cherry wood slats on hull sides above settee backrests in main salon and nav station.•
Storage compartments behind the seat backrest cushions.•
Varnished cherry main cabin, drop-leaf table with bottle storage compartment.•
Vinyl lining on overhead.•
Removable teak & holly veneer floor panels finished in varnish with underside and ends sealed with epoxy.•
Large, sit-down, forward facing nav table with chart storage, instrument panel, bookshelf and outboard storage shelf.•
Overhead stainless grab rails in main cabin to port and starboard.•
Aft Starboard Cabin: Double berth with cushions, vinyl hull siding, vanity with drawers and cabinet, full length shelf,hanging locker, and varnished teak & holly cabin sole.
•
Aft Port Cabin: Mirror image of starboard cabin. (Aft head option to port available).•
High polished double stainless sink mounted in wheat-matrix Nevamar laminated J-shaped galley countertop withvarnished cold-molded fiddles.
•
Three-burner Force 10 propane stove/broiler/oven with slide-away oven door recess and S.S. stove bar.•
Two 6lb aluminum propane bottles in cockpit propane locker connected through solenoid shutoff switch. Locker capacityfor three bottles.
•
Manual fresh water foot pump.•
6.5 cu.ft. icebox with dual hinged top, and internal acrylic sliding shelf/divider.•
Dry goods storage bins outboard.…J/133 Specifications Continued
September 1, 2006 Page 3
•
SS vertical grab bar mounted on forward inboard corner of galley and attached to deck.•
Griddle and pan storage locker under stove.•
Flatware and utensil drawers.•
Large trash bin storage with flip-lid access under counter.•
Storage area under galley island suitable for optional microwave installation.•
Harken 60.2 AST self-tailing 2 speed primary winches (2).•
Harken 48.2 STA self-tailing, 2 speed mainsheet winches (2).•
Harken 48.2 STA self-tailing, 2 speed, secondary winches mounted on the cabin trunk (2).•
Harken 46.2 STA self-tailing , 2 speed forward halyard winches (2).•
Four Harken Speedgrip lock-in winch handles with four PVC winch handle holders.•
Custom Stainless mast collar with fastening points for halyard blocks.•
Harken "Black Magic" blocks for reef lines, spinnaker and genoa blocks.•
Harken stainless "ESP" halyard and reef blocks at mast collar.•
Spinlock rope clutches for halyards, reef lines, furler line, and tack line.•
Harken mainsheet and traveler system with Black Magic series blocks & components.•
Harken adjustable jib/genoa car system with purchase system led to the cockpit.•
Stainless bow pulpit and stern rail with gate.•
Custom stainless stemhead fitting.•
Tapered lifeline stanchions with amidship boarding gates port and starboard.•
Four 10" 4-bolt mooring cleats.•
Three articulated, acrylic Gebo hatches with screens.•
Nine Gebo opening ports and one fixed port (over Nav station) on cabin trunk with screens.•
Two Gebo opening ports with screens in cockpit well, one each for port and starboard aft cabins.•
Thurston cockpit dodger with roll-up forward window & removable side curtains.•
Telescoping transom swimming ladder.•
Four 16x24 polypropylene mesh line bags.•
Hall Spars pre-preg carbon fiber mast autoclaved at 80 PSI at 250 deg F. Mast includes double airfoil aluminumspreaders, carbon gooseneck, white Awlgrip finish, painted black bands, wire runs in conduit, Antal mainsail track for #40
cars with loader and end fittings to accommodate sailmaker provided mainsail sliders and/or boltrope. Also included with
the mast are; Spartite mast wedge material, anchor light, steaming light,ORC mast attachment system to mast step.
•
Mast Step: G10 epoxy custom fit mast step attaches to molded centerline longitudinal hull stringer with four SS boltstapped to integral aluminum plate.
•
Hall Spars boom of 6061-T6 aluminum with white Awlgrip finish, welded gooseneck fitting, lug for boom vang, internal 12:1mainsail outhaul with external cleat, bale for mainsheet block and painted white bands. Outboard end to accommodate
single line reef to starboard and 2nd clew reef to port.
•
Hall D-30 QuikVang.•
Harken MKIII Unit 2.0 furling system with airfoil performance extrusion, corrosion proof spool and drum, tapered torquetube, AirSwivel for reduced weight aloft, cast aluminum Hardcote anodized chafe guard, and low stretch adjuster line.
•
Navtec continuous rod rigging and turnbuckles.•
Sailtec integral hydraulic backstay.•
Hall Spars retractable carbon fiber J/Sprit with clearcoat Awlgrip finish.•
Harken tackle system for bowsprit with control line led to cabin top rope clutch.•
Bowsprit bearing system with drain mounted in hull housing and exterior neoprene seal.•
Optimized Hall rigging package including; two Technora jib halyards, two Spectra spinnaker halyards each with TylaskaSS shackles and flemish eye terminations, 1:1 main halyard of Technora with Wichard shackle, Mainsheet and two traveler
control adjuster lines, two Spectra genoa sheets, two tapered Spectra spinnaker sheets, Spectra spinnaker tack line, three
…J/133 Specifications Continued
September 1, 2006 Page 4
reef lines: One continuous reef line to starboard. Tack reef #2 doubles as cunningham to port. Clew reef #2 is included with
its own dedicated hardware.
…J/133 Specifications Continued
September 1, 2006 Page 5
Options
Layout Option:
•
2 Head/2 Cabin Layout: aft port head with walkthrough to cockpit storage locker, wet locker outboard of head,jacket storage behind the door, Y-valve for overboard and tank, manual pump-out for the holding tank; holding tank
located on shelf in storage locker, self priming direct sump pump for shower draining directly overboard, molded
sink, Raritan head, hot & cold shower, port-side cockpit locker is opened for direct cockpit access to storage locker.
Package Options:
•
DC Refrigeration: 12V Seafrost DC refrigeration system•
Systems Group: Belowdecks manual bilge pump, 40 gal. bladder water tank under starboard quarter berth andSeagull water purifier in galley.
•
Marina Group: 30 amp shore power system including 50' cord, 110 outlets in galley, nav. station, forward head andport aft head/cabin, Xantrex 20 Inverter and (2) add'l 105 amp AGM batteries.
•
Comfort Group: 2 White vinyl cockpit cushions, 3 white vinyl helmsman cushions, 4 helmsman lifeline pads and aJ/133 sail cover with a logo centered in the cover (Sunbrella colors).
•
Deluxe Trim Package: Standard cherry (optional Teak) hull siding in the forward and aft starboard cabin. Availablein both 2-cabin and three-cabin layouts.
•
Anchoring Package: Lewmar Concept Windlass (gypsy only), Custom Removable Bow Roller and Treadmasterdeck protection for rode.
Single Options:
•
Shoal Draft Keel: 6.25' draft in lieu of standard 7.5'.•
Cove Stripe: 1/2" cove stripe same color as owner specified boot color.•
Additional Boot: 1" boot stripe located 1" above the standard bootstripe.•
All Teak Interior: Teak is substituted for cherry for all standard flat panels, trims and door/cabinet faces.•
Ultra Suede in Main Cabin: Upgrade from Nylon to Ultra Suede for the main cabin and nav seat cushions.•
Microwave Oven: Mounted in the galley below countertop with dedicated 110 outlet. (CE 220V microwaveavailable).
•
Removable Teak Cockpit Table, Varnished with Padded Bag: Teak table with two fold out leafs, removable tableleg and a padded bag to protect the table when stored below.
•
SSB Groundplane•
Electric Primary Winches•
Electric Secondary Winch to port on cabin top (aft).Notice:
Specifications are subject to change prior to delivery due to deletion, additions or revisions
in quantities, brand or design at the sole discretion of J/Boats, Inc. Newport, RI.