J/22 Specifications
Archived page (captured 2008). Model details, prices and dates may be out of date; check the manufacturer for current information.
|
J-22
J/22 Specifications Construction • Lloyds approved Baltek end grained balsa core laminated construction, using hand laid-up glass in both hull and deck.• Hulls molded in one piece permitting exceptional consistency in fairness and finish.• Vinylester resin in outer hull skin for 10 year transferable blister warranty.• Structural main bulkhead glassed to hull and deck.• Heavy-duty stainless steel chainplates bolted to main bulkhead and grounded.• Anodized aluminum compression post and bearing beam glassed into hull.• Molded interior watertight compartments for added flotation and less maintenance.• Near minimum weight faired transom-hung rudder with Schaefer heavy-duty gudgeons.• Lead & Antimony fin keel finished in VC Underwater Epoxy.• White gelcoat hull and deck.• New improved nonskid surfaces on deck and cockpit sole.• Deck and hull bonded with "Plexus" structural adhesive.• ORC sized white thermo-plastic toerail running full length of the deck both sides.• Latest Harken deck hardware including Harken traveler track and car. 1:1 jib sheeting, Harken winches. See standard Deck Layout.(Note: No changes to deck layout, hardware will be supplied loose.) • Custom laminated tiller with hiking stick.• Schaefer race jib tracks and adjustable cars.• 2 Schaefer horn cleats aft.• 2 bow chocks and 1 bow pad eye.• Stainless Steel hand rails.Running Rigging • Main Halyard 5/16" T-900 w/Wichard shackle.• Jib Halyard 5/16" T-900.• Spinnaker Halyard ¼" XLS Extra.• Main Sheet 3/8" XLS.• Jib Sheet 3/8" STA-SET.• Spinnaker Sheets 5/16" STA-SET X Lite.• Backstay, Traveler and Twings ¼" Novetec Dinghy Braid.• Foreguy 5/16" Ultralite.• Vang Line 5/16" STA-SET• Main Cunningham 1:1 - 1/8" Spectra and 3/16" Ultralite.Spars • Tapered Hall Spars class mast with airfoil spreaders, thru-bar spreader bracket, Gibb "T" terminals, and black measurement bands.• Class Certified Boom w/Harken internal outhaul.• Forespar spinnaker pole with ultra ends.• 1 x 19 Standing Rigging with Open Body Turnbuckles.Options • Two Tone Deck.• Lightweight outboard motor bracket.• V-Berth cushions.• Spinnaker Launching Bag (installed).• Waterline Systems – Faired Epoxy Bottom.• Notice: Specifications are subject to change without prior notice or obligation, J Boats and/or USWatercraft reserves the right to periodicallyupgrade these specifications through additions, deletions and substitutions. September 01, 2006. |